Whether the structure of cold stamping die design is reasonable plays a key role in the success of the production of precision hardware. Even a group of simple die components can reach dozens, so their accuracy cannot be underestimated in the design.
At the beginning of design, what kind of mold structure should be selected? Is it the front mold structure (that is, the female mold is installed on the lower mold base)? Or the reverse (reverse) mold structure (i.e. the punch installed on the lower mold base)? Or choose single process mold structure? Or should we choose composite mold structure? This is a topic worthy of in-depth discussion before every mold worker.
It mainly refers to the conditions under which the single-process die structure is selected. The so-called single-process die structure refers to that the punch can only complete one process in one stroke.
Advantages of single process mold structure
(1) The mold has simple structure, short manufacturing cycle and low processing cost;
(2) The die has good versatility and is not limited by the size of stamping parts, which is suitable for producing small and medium-sized stamping parts;
(3) It is suitable for producing some large size and thick stamping parts.
Disadvantages of single process mold structure
(1) Low part accuracy
(2) Low production efficiency
Selection principle of single process tool structure
To sum up, it can be seen that for a certain precision, the requirements are not high, and the production batch of workpiece is not large, so it is appropriate to use single-process mold.
Products developed in this way can quickly occupy the market. In this respect, single-process mold can meet this requirement and make it more practical.
WLL also has rich processing experience in precision hardware stamping parts. It has more user needs to support non-standard customization, and can also be customized with ultra-high precision, 1:1 reduction, and 1 million pieces of monthly capacity. Welcome to consult.
Contact Person: Mr. Hou
Tel: 13657605002
